Thread wrap studio

Wrap preview Size D

Display scale & calibration

Manual: adjust CSS pixels per mm until the line matches calipers set to 50 mm. Or measure the line, enter its length below, and click Apply calibration.

50 mm

Wrap parameters

Untitled designLeft to right = wrapping order
Thread catalog Fuji & ProWrap · Size D

Click a thread image or + Palette to collect colors for this design. Click a quick-palette color to add a band. Star threads to save them across designs.

Loading size D catalog…

Swatches show retailer photos. Preview colors are sampled estimates, not manufacturer RGB values. Metallic and neon cannot be reproduced accurately on screen.

Design library

Your saved designs first, followed by example patterns.

Design colors 0

Click a color to add a band. Adding, removing, or reordering palette colors reassigns letters in shelf order.

Fishing rod thread design tool

Plan your next custom rod wrap with Rod Loom. Try color bands and spiral fades, preview the result, and print a wrapping recipe. Free to use in your browser—no install or account needed.

Design a fishing rod thread wrap before you start wrapping

A thread wrap is easier to plan when you can see the colors together. Rod Loom lets custom rod builders arrange solid color bands and paired two-thread spiral fades, check their proportions on a rod preview, and take a turn-by-turn recipe to the wrapping bench.

How to use the rod wrap designer

  1. Start with a design. Open Design library for an example, or use New blank design to build your own wrap.
  2. Choose your thread colors. Browse the Fuji and ProWrap Size D catalog and add colors to Quick palette. Click a palette color to add a band.
  3. Set the band widths. Adjust each band's turn count in Thread bands. Add a Spiral into next color transition between neighboring solid bands for a paired fade. Mirror pattern repeats your design in reverse to create a symmetrical wrap.
  4. Check the dimensions. Under Display scale & calibration, set Size A or D, thread coverage, and blank diameter. Compare the shaded rod and flat previews; zoom in to inspect individual turns.
  5. Take the plan to your bench. Open Recipe for the wrapping order, dimensions, and thread estimates. Print it or choose Save as PDF. Export a PNG to share the preview and JSON to back up an editable design.

Plan trim bands, color combinations, and spiral fades

Use narrow accent bands to separate larger blocks of color, or mirror a sequence for a balanced decorative wrap. A paired spiral fade places two threads side by side before terminating the outgoing color. It is different from a decorative cross-wrap pattern.

For a starting point, try 12 turns of one color, a 4-turn paired spiral into a second color, then 12 turns of that second color. The spiral count represents finished paired revolutions. In the Patterns tab, the same sequence is 12A, 4/AB, 12B when your Quick palette contains colors A and B.

Estimate thread turns and wrap width

For a solid band, approximate width is turn count multiplied by thread coverage. At the initial Size D estimate of 0.25 mm per turn, 20 turns cover about 5 mm. Size A starts at 0.15 mm per turn. Measure a test wrap with your own thread and adjust coverage for a more useful estimate.

Blank diameter affects the estimated thread length around the rod. Allow extra thread for setup, tag ends, and waste; the estimates do not include these. Screen colors are sampled approximations, and metallic or neon threads cannot be reproduced accurately. Check physical thread samples before committing to a color scheme.

Rod Loom and VisualWRAP: choose for the wrap you want to build

ThreadCentral's VisualWRAP focuses on decorative cross wraps, with pattern scripting, thread-by-thread pattern development, and taper-compensated layout spacing. Rod Loom focuses on solid bands and paired spiral fades in a free browser-based workbench.

If you are choosing colors, planning band widths, or preparing a recipe for a band-and-fade wrap, use the Rod Loom designer. Rod Loom is not a cross-wrap simulator and does not calculate taper-compensated cross-wrap spacing. Its printed recipes and exported images are not calibrated life-size templates.

Common questions about designing rod wraps

Is this fishing rod thread design tool free?
Yes. Rod Loom is free to use in a modern browser, with no software installation or account required.
Can I design with Size A and Size D thread?
Yes. Choose either size under Display scale & calibration and adjust coverage to match your thread. Catalog photos and product links are Size D references; verify Size A products separately.
Where are my wrap designs saved?
Your draft autosaves in your browser. Save design creates a named snapshot in Design library. Export JSON for a durable backup or to move a design to another browser; clearing site data removes local saves.
Can I share a design with another rod builder?
Use Copy design link in Design library to share an editable wrap. Opening the link loads a local draft and asks before replacing existing work; it does not create a named save. Export a PNG for a visual reference, JSON for a backup, or use Recipe for a printable turn-by-turn plan.
Can an AI agent preview a rod wrap before sharing it?
Yes. The hosted preview API renders rod and flat views as a PNG. The MCP preview tool returns that image directly to compatible, image-capable agents with validation results and practical warnings. The agent must actually inspect the image; passing validation alone does not establish visual quality.

Design and preview rod wraps with an AI agent

Install the Rod Loom agent skill with npx skills add jaywolters/rodloom-skills --skill rodloom to teach your agent the design, preview, and sharing workflow. The skill includes MCP setup and an HTTP fallback; installing it does not automatically connect tools or enable vision.

Start with the agent quickstart for the full design JSON format, real Fuji and ProWrap catalog threads, hosted validation, PNG previews, and share links.

  1. Validate the plan. The design-validation API checks catalog identities and returns wrap width, estimated thread usage, and practical warnings.
  2. Inspect the preview. Connect an image-capable agent using the MCP visual feedback guide. Its preview_design tool returns a native PNG image of the rod and flat views alongside validation results. Without MCP, download the preview API’s PNG and open it with an image-viewing tool. If the agent cannot see the image, the design is still unpreviewed.
  3. Share the editable design. Follow the direct design link guide to create an Open in Rod Loom link. Opening it loads a local draft and asks before replacing existing work; it does not create a named library save.

Rendering and validation do not save designs online. Preview colors and metallic effects are estimates; inspect physical thread samples and verify dimensions before wrapping. The design authoring guide, JSON design schema, and example file also cover JSON Import for larger designs and backups.

Agent resource index

Copy this link to open the design in Rod Loom. Anyone with the link can read the design.

Unsaved changes